Type of Feed: Pressure
Material:stainless steel
Standard nozzle:517
Operating Pressure:3600psi
Pattern Width:254-305mm
Paint connection:1/4-18NPSM
Maintenance of spray gun:
Some problems sometimes appear in the process of using the spray gun. Now we will analyze the phenomenon of the spray gun in detail, and according to the phenomenon, analyze the reasons and find out the solutions.
Here are some common faults and solutions:
| fault |
reason |
solutions |
| Left or right |
1.The fan control hole on one side of the air cap is blocked |
Clean the atomizing cap |
- Damaged air cap
|
Replace the atomizing cap |
| The center of spraying amplitude is too thick |
- The viscosity of the sprayed paint is too high
|
Reduce paint viscosity |
- Spraying pressure is too low
|
Increase spray pressure |
- The diameter of nozzle and ejector pin increase and decrease due to wear
|
Replace nozzle set |
| Spray amplitude splitting |
1.Paint viscosity is too low |
Increase paint viscosity |
| 2.Spraying pressure is too high |
Reduce the spraying pressure |
| 3.The inner diameter of the fan control hole is too large |
Replace nozzle set |
- Insufficient paint
|
Add enough paint |
- Atomization air passage blocked
|
Clean the air passage of the spray gun |
| Jump gun |
1.The nozzle is not tightened or installed properly |
Tighten the nozzle or clean and install the nozzle set |
| 2.Loose gun needle seal kit |
Fastening thimble seal kit |
| 3.The connecting nut of the spray gun is loose (lower pot spray gun) |
Tighten the connecting nut |
| 4.Insufficient paint in the pot |
Supplementary coating |
| 5.Nozzle set damaged |
Replace nozzle set |
Fuzhou XSP industry Co. Ltd. started it humble began as a small metal workshop in 1990's.
In 2000's, we started the painting machine fitting production with the help of some long- term customers and friends,mainly engaged in spare parts for graco,wagner and titan airless paint sprayers. We, with the experience and capital accumulation, XSP explored the production into complete machine since 2010 and established our own local brand.
With the efforts of our staff, XSP now has a sound reputation in Chinese market and started to spand our marketshare on global market.
We provide a large range of airless paint sprayer and spare parts:repair kit ,tips,piston rods,cyclinders,extension rod ,spray gun ,high pressure hoses, tip guard and various valves. We choose the best raw material to make selected products for our customers. We've gained much good reputation for our good quality.
Once you place a trial order,you will be willing to cooperate with us for a long time.
We are ready to be a part of your success in the near future.
We also have the ability to do OEM, any request of airless paint sprayer and fittings pls feel free to contact us via mail.
Welcome to visit our website :http://isprayer.en.made-in-china.com.
Audited Supplier 
){kind=link}
){kind=link}